10000 / 7500 W, 34.1 / 25.6 BTU/Hr Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater, TPI HF2B5110CA1L is a perfect blend of highest quality, exceptional performance and value. It features totally enclosed, 1-speed, 1-phase, permanently lubricated thermally protected motor with unit bearings, fan over-ride that purges unit of residual heat at shutdown and individually adjustable louvers for directional control of air flow up to 15 deg. from straight horizontal.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF2B5110CA1L Specifications |
|---|
| BTU | 34.1 / 25.6 |
|---|
| Wattage | 10000 / 7500 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 24 V |
|---|
| Product Weight | 55 Lbs. |
|---|
| Product Dimensions | 21-1/2"W x 6-1/2"D x 24-5/16"H |
|---|
| Phase | 1 / 3 |
|---|
| Temperature Rise | 45 F |
|---|
| CFM | 700 |
|---|
| Amperage | 41.2-24.0 / 36.1-20.8 |
|---|
| Air Throw | 22' |
|---|
| Recommended Mounting Height | 10' Hortz.
14' Vert. |
|---|
| UPC | 686334645287 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF2B5110CA1L Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with automatic reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motor with unit bearings
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus listed