50000 / 37500 W, 170.6 / 128.0 BTU/Hr Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater is one of the most-selling unit heaters worldwide. TPI HF3B5150CA1L features 18 ga. steel cabinet with powder coated finish, control compartment housing a master terminal board with a hinged and latched access door, spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow and totally enclosed 2-speed 1-phase permanently lubricated and thermally protected motor with sleeve bearings.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5150CA1L Specifications |
|---|
| BTU | 170.6 / 128.0 |
|---|
| Wattage | 50000 / 37500 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 24 V |
|---|
| Product Weight | 120 Lbs. |
|---|
| Product Dimensions | 29-1/4"W x 10-1/16"D x 34"H |
|---|
| Phase | 3 |
|---|
| Temperature Rise | 51 / 56 F |
|---|
| CFM | 3100 / 2800 |
|---|
| Amperage | 120.5 / 104.3 |
|---|
| Air Throw | 50' |
|---|
| Recommended Mounting Height | 15' Hortz.
22' Vert. |
|---|
| UPC | 686334645508 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5150CA1L Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with automatic reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - Totally enclosed, 2-speed, 1-phase, permanently lubricated, thermally protected motor with sleeve bearings
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
- Designed for two stage heating operation
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus Listed