Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater, TPI HF3B5160CA1, comes with 60000 / 45000 Watts of power and 204.7 / 153.6 BTU/Hr. This unique unit includes manual reset type limit to de-energize the heater should an over-temperature situation occur, optional low voltage and line voltage thermostats with an adjustable temperature range of 50-90 deg. F and heat stratification thermostat. It is designed for up to three stage heating operation and can be mounted for horizontal or vertical discharge.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5160CA1 Specifications |
|---|
| BTU | 204.7 / 153.6 |
|---|
| Wattage | 60000 / 45000 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 24 V |
|---|
| Product Weight | 141 Lbs. |
|---|
| Product Dimensions | 30-1/2"W x 14-1/2"D x 35-1/2"H |
|---|
| Phase | 3 |
|---|
| Temperature Rise | 60 / 45 F |
|---|
| CFM | 3400 |
|---|
| Amperage | 144.6 / 125 |
|---|
| Air Throw | 50' |
|---|
| Recommended Mounting Height | 18' Hortz.
31' Vert. |
|---|
| UPC | 686334721356 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5160CA1 Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with manual reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - 1 speed motor, ball bearing, thermally protected
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
- Designed for up to three stage heating operation
- Factory wired for low voltage controls
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus Listed