70000 / 52500 W, 238.9 / 179.2 BTU/Hr Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater is amongst the best quality unit heaters by TPI. Model HF3B5170CA1 comprises of spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow, ball bearing thermally protected 1 speed motor and fan over-ride that purges unit of residual heat at shutdown. Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5170CA1 Specifications |
|---|
| BTU | 238.9 / 179.2 |
|---|
| Wattage | 70000 / 52500 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 24 V |
|---|
| Product Weight | 141 Lbs. |
|---|
| Product Dimensions | 30-1/2"W x 14-1/2"D x 35-1/2"H |
|---|
| Phase | 3 |
|---|
| Temperature Rise | 70 / 53 F |
|---|
| CFM | 3400 |
|---|
| Amperage | 168.7 / 145.8 |
|---|
| Air Throw | 50' |
|---|
| Recommended Mounting Height | 18' Hortz.
31' Vert. |
|---|
| UPC | 686334721431 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5170CA1 Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with manual reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - 1 speed motor, ball bearing, thermally protected
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
- Designed for up to three stage heating operation
- Factory wired for low voltage controls
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus Listed