SKU: HF3B51100CA1
Mfg Number:
- BTU /hr.: 341.3 / 256 btu's
- Fuel Type: Electric
- Volts: 240 / 208 V
- Dimensions: 37-1/2"W x 18-1/2"D x 39-1/2"H
Availability: In Stock Usually ships In 7-10 Business Days
This Product Will Ship LTL / Freight
Product Information
Retail: $10,886.00
Price: $5,987.30
You Save: $4,898.70 (45.0%)
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater comes with 100000 / 75000 Watts of power and 341.3 / 256 BTU/Hr. TPI HF3B51100CA1 features 18 ga. steel cabinet with powder coated finish, control compartment housing a master terminal board with a hinged and latched access door and spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow. The louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B51100CA1 Specifications |
|---|
| BTU | 341.3 / 256 |
|---|
| Wattage | 100000 / 75000 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 24 V |
|---|
| Product Weight | 202 Lbs. |
|---|
| Product Dimensions | 37-1/2"W x 18-1/2"D x 39-1/2"H |
|---|
| Phase | 3 |
|---|
| Temperature Rise | 68 / 51 F |
|---|
| CFM | 5000 |
|---|
| Amperage | 241 / 208.3 |
|---|
| Air Throw | 65' |
|---|
| Recommended Mounting Height | 22' Hortz.
40' Vert. |
|---|
| UPC | 686334721820 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B51100CA1 Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with manual reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - 1 speed motor, ball bearing, thermally protected
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
- Factory wired for low voltage controls
- Designed for up to four stage heating operation
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus Listed
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
37-1/2"W x 18-1/2"D x 39-1/2"H