Presenting 80000 / 60000 W, 273 / 204.7 BTU/Hr Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater in our online store. TPI HF3B5180CA1 is equipped with 18 ga. steel cabinet with powder coated finish, control compartment housing a master terminal board with a hinged and latched access door, optional diffusers for down flow (vertical discharge) applications and optional low voltage and line voltage thermostats with an adjustable temperature range of 50-90 deg. F. This unique unit is designed for up to four stage heating operation.
| Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5180CA1 Specifications |
|---|
| BTU | 273 / 204.7 |
|---|
| Wattage | 80000 / 60000 W |
|---|
| Voltage | 240 / 208 V |
|---|
| Control Volts | 24 V |
|---|
| Product Weight | 202 Lbs. |
|---|
| Product Dimensions | 37-1/2"W x 18-1/2"D x 39-1/2"H |
|---|
| Phase | 3 |
|---|
| Temperature Rise | 55 / 41 F |
|---|
| CFM | 5000 |
|---|
| Amperage | 192.8 / 166.7 |
|---|
| Air Throw | 65' |
|---|
| Recommended Mounting Height | 22' Hortz. 40' Vert. |
|---|
| UPC | 686334721707 |
|---|
Horizontal/Vertical Discharge Fan Forced Suspended Unit Heater - TPI HF3B5180CA1 Features:
CONSTRUCTION: - 18 ga. steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation & maintenance
HEATING ELEMENT: - Spiral fin steel element with continuously brazed steel fins formed to allow side draw through air flow
OVERHEAT PROTECTION: - Equipped with manual reset type limit to de-energize the heater should an over-temperature situation occur.
FAN and MOTOR: - 1 speed motor, ball bearing, thermally protected
- Fan over-ride purges unit of residual heat at shutdown
LOUVER ASSEMBLY: - Louvers are individually adjustable for directional control of air flow up to 15 deg. from straight horizontal
- Optional diffusers available for down flow (vertical discharge) applications
TEMPERATURE CONTROLS: - Optional low voltage and line voltage thermostats available with an adjustable temperature range of 50-90 deg. F
- Designed for up to four stage heating operation
- Factory wired for low voltage controls
INSTALLATION: - It can be mounted for horizontal or vertical discharge
- Suggested for applications up to 6000 feet
FIELD INSTALLED OPTIONS: - In-Built or wall mounted temperature control thermostats - low or line voltage
- Summer fan switch to operate the fan only.
- Power disconnect switch
- Heat stratification thermostat
- cETLus Listed