Introducing TPI 2000W Institutional Wall Convector Heater in ivory finish. Model E8806200 has a heating capacity of about 6826 BTU. The unit is made using 11 gauge perforated steel housing. The control panel is kept in a tamper proof housing. It also has linear limit type thermal overload with automatic reset for your safety. It has single pole in-built thermostat that has temperature ranging from between 50 F to 90 F.
|TPI 2000W Institutional Wall Convector Heater E8806200 Specifications|
|Dimensions||72" L x 18" H x 5" D|
TPI 2000W Institutional Wall Convector Heater E8806200 Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Minimum mounting height is 7' for all units
- ABS Type Approved