Electric Heaters - TPI Multi-Watt ( Phase 3 ) Fan Forced Unit Heater - H3H5605T - 5000W / 240V

TPI H3H5605T Multi Watt Fan Forced Electric Unit Heater is a 17065 BTU unit with 240 volts, 3 phase and 5000 watts. This TPI Heater features a totally enclosed, single phase, permanently lubricated, thermally protected motor mounted with rubber insulators to minimize vibration and noise. It is equipped with an automatic reset thermal cutout to shut down the element and motor circuits if unsafe operating temperatures are exceeded. The heater also has a heavy-duty hydraulic thermostat and an optional disconnect switch for field installation. Available with a three position-mounting bracket for wall, ceiling or workbench, these heaters can be mounted for horizontal or vertical discharge.

TPI Multi-Watt Fan Forced Heater H3H5605T Features:

• Horizontal or Vertical Discharge
• Heavy gauge welded steel cabinet with powder coated finish and control compartment with a hinged and latched access door
• Block finned steel element
• Automatic resetting over-heat limit control
• Totally enclosed, single phase, permanently lubricated, thermally protected motor, mounted with rubber insulators to minimize vibration and noise
• Individually adjustable louvers
• Hydraulic action thermostat with an adjustable temperature range 50 to 90 or remote and wall thermostat may be used
• Heavy duty bracket standard on all models, allows mounting to wall or ceiling - Minimum mounting height - 6 feet
• Field Installed options - disconnect switch
• 24V control standard on 3 phase units, optional on 1 phase units
• UL / CUL Listed
• Approved for residential applications