Cadet TH401 electronic thermostat provides precise temperature control using a proportional integral adaptive microprocessor. The slim design, triac switching for silent operation, and push button access make this unit a premium choice for a non-programmable thermostat. This single pole (2 wire) model thermostat is recommended for 120, 208, and 240 volt (line voltage) baseboard and in-wall fan heaters, and can be set for 15-second (baseboard) cycles, or 5-minute (fan heater) cycles. The setpoint range is 40 F to 86 F (5 C to 30 C).
Architectural Information
The electronic thermostat shall be UL and CSA Listed. The thermostat shall have LED indication of status of heater. Switching means shall be by "Triac switching action" to eliminate RF line noise. The control shall be capable of switching loads of 10.4 amps at 240 VAC. Vented housing shall be white and made of flame retardant high impact plastic with two mounting screws provided. No batteries shall be required for operation.
| Cadet Non-Programmable Wall Mount Thermostat TH401 Specifications |
|---|
| Color | White |
|---|
| Dimension | 3.3"W x 5"H x 1.2"D |
|---|
| Box Weight | .6 Lbs. |
|---|
| Voltage | 120 / 208 / 240 V |
|---|
| UPC | 027418728382 |
|---|
Cadet Non-Programmable Wall Mount Thermostat TH401 Features:
- Unsurpassed digital temperature sensing provides unbeatable accuracy of 0.15 C / 0.27 F, eliminating temperature swings
- Push button controls
- Triac switching acting provides 100% silent operation
- Temperature lock limits minimum and maximum setpoints
- Use with 120, 208 or 240 Volt In-Wall Electric Heaters and Baseboards, up to 2500 watts
- On-screen heating power indicator verifies power being used at-a-glance
- Two-wire design with non-polarized lead wires assure easy installation for new construction or replacement
- Single Pole (2 wires)
- 1 year warranty
- UL listed