Introducing 10KW three phase package duct heater, TPI PD1010183, which uses 240 V supply. This unit has galvanized steel element rack and compartment with 1/2" fiberglass insulation & hinged cover. This unit includes 24 volt step down control transformer and definite purpose magnetic contactor. It has primary automatic reset temp limiting control with door interlock disconnect switch.
| 10 KW Packaged Duct Heater TPI PD1010183 Specifications |
|---|
| Power | 10 KW |
|---|
| Voltage | 240 |
|---|
| Phase | 3 |
|---|
| Duct Height | 10" A |
|---|
| Duct Width | 18" W |
|---|
| Dimensions | 4-3/4" C x 6-1/2" E x 22" M |
|---|
| Amperage | 24.1 |
|---|
| Control Step | 1 |
|---|
| UPC | 686334617178 |
|---|
| Weight | 26 Lbs. |
|---|
10 KW Packaged Duct Heater TPI PD1010183 Features:
- Galvanized Steel Element Rack - Always 1" shorter than duct height and 1/2" shorter than duct width to allow insertion clearance
- Galvanized Steel Compartment with 1/2" fiberglass Insulation & Hinged Cover
- Door Interlock Disconnect Switch
- Primary Automatic Reset Temp Limiting Control
- Load Carrying Secondary over Temperature Protective Device
- Definite Purpose Magnetic Contactor
- Differential Pressure Fan Inter-lock Switch
- Step Down Control Transformer / 24 volt
- Permanently Attached Wiring Diagram on inside of Terminal Compartment Cover