We present TPI 20KW three phase package duct heater having galvanized steel element rack that is 1" shorter than duct height and 1/2" shorter than duct width to allow sufficient insertion clearance. Model PD2012203 has door interlock disconnect switch and differential pressure fan inter-lock switch. It has primary automatic reset temperature limiting control. The compartment is made up of galvanized steel that also has 1/2" fiberglass insulation and hinged cover.
| 20 KW Packaged Duct Heater TPI PD2012203 Specifications |
|---|
| Power | 20 KW |
|---|
| Voltage | 240 |
|---|
| Phase | 3 |
|---|
| Duct Height | 12" A |
|---|
| Duct Width | 20" W |
|---|
| Dimensions | 9-1/8" C x 6-1/2" E x 28" M |
|---|
| Amperage | 47.9 |
|---|
| Control Step | 2 |
|---|
| UPC | 686334617208 |
|---|
| Weight | 39 Lbs. |
|---|
20 KW Packaged Duct Heater TPI PD2012203 Features:
- Galvanized Steel Element Rack - Always 1" shorter than duct height and 1/2" shorter than duct width to allow insertion clearance
- Galvanized Steel Compartment with 1/2" fiberglass Insulation & Hinged Cover
- Door Interlock Disconnect Switch
- Primary Automatic Reset Temp Limiting Control
- Load Carrying Secondary over Temperature Protective Device
- Definite Purpose Magnetic Contactor
- Differential Pressure Fan Inter-lock Switch
- Step Down Control Transformer / 24 volt
- Permanently Attached Wiring Diagram on inside of Terminal Compartment Cover