Infrared Heaters - Procom Vent-Free Natural Gas Infrared Space Heater - MN100TPH - 10000 BTU
Presenting Procom Vent-Free Gas Infrared Space Heater with 10000 BTU. MN100TPH controls thermostatic heat with a thermostat sensing bulb which results in greatest comfort and will result in lower gas bills. This unit comes with piezo ignition system that requires AAA batteries (provided). It also has an oxygen depletion sensing safety shutoff system that shuts it off when there is not enough fresh air.
| Procom Vent-Free Gas Infrared Space Heater MN100TPH Specifications |
|---|
| Power | 10000 BTU |
|---|
| Gas Type | Natural Only |
|---|
| Ignition | Piezo |
|---|
| Inlet Gas Pres. Max. | 10.5" |
|---|
| Inlet Gas Pres. Min. | 7" |
|---|
| Heater Dimensions | 22.3" H x 17.32" W x 9.62" D |
|---|
| Carton Dimensions | 25.5" H x 21" W x 11" D |
|---|
| Heater Weight | 16 Lbs. |
|---|
| Shipping Weight | 22.2 Lbs. |
|---|
Procom Vent-Free Gas Infrared Space Heater MN100TPH Features:
- Safety Pilot This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot shuts off the heater if there is not enough fresh air.
- Piezo Ignition System This heater is equipped with an automatic control system. This system requires AAA batteries (provided).
- Thermostatic Heat Control This heater has a control with a thermostat sensing bulb. This results in the greatest heater comfort and will result in lower gas bills.
- 3 Year Limited Warranty
- Note: Vent free heaters do not operate above 4500 feet altitude.
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
22.3" H x 17.32" W x 9.62" D