Single Plaque Vent-Free Natural Gas Infrared Heater - 6000 BTU - MN060HPA - Procom Infrared Heaters
Presenting Single Plaque Vent-Free Natural Gas Infrared Heater with 6000 BTU manufactured by Procom. Model MN060HPA heats objects in the room before heating the air. Best suited for a bathroom or small room, this heater requires no electricity, no outside duct or chimney, thereby, saving your heating costs. This stylish heater comprises of a space saving design, 2 heat settings, Oxygen Depletion Sensor (ODS) safety shutoff system, and piezo ignition system.
|Infrared Vent-Free Gas Space Heater - ProCom MN060HPA|
|Gas Type||Natural Gas|
|Pressure Regulator Setting||6" W.C.|
|Dimensions (Heater)||19-1/8"H x 14-1/8"W x 6-3/8"D|
|Dimensions (Carton) ||22"H x 16-3/4"W x 8-1/8"D|
|Product Weight||12 Lbs.|
|Shipping Weight||15 Lbs.|
|Maximum Inlet Gas Pressure* (inches of water)||10.5"|
|Minimum Inlet Gas Pressure* (inches of water)||7"|
|Warranty||1 Year Limited Warranty|
|Dimensions listed are outer most points on the heater (includes control knobs and grill). |
* For purposes of input adjustment.
ProCom Infrared Gas Heater MN060HPA Features:
- Manual Control: It includes 2 heat settings.
- Space saving design without sacrificing beauty.
- Economical: 99.9% efficient. No outside duct or chimney needed.
- Safety Assurance: This heater has an Oxygen Depletion Sensor(ODS) safety shutoff system included with automatic shut-off, internal, non-adjustable regulator to prevent over firing. The ODS/pilot shuts off the heater if there is not enough fresh air.
- No electricity required.
- Piezo Ignition System: This heater is equipped with a push button piezo ignitor. This system requires no matches, batteries, or other sources to light heater.
- CSA design certified
- Note: Vent free heaters do not operate above 4500 feet altitude.