Commercial/Warehouse Heaters - Electric Convection High Temperature Blower Heater - Qmark SDH6093 - 204600 BTU
We bring you this Electric Convection High Temperature Blower Heater from Qmark. Model SDH6093 gives 204600 BTU output and comes with 10 inch pneumatic wheels and locking front caster. This High Temperature Blower comes with 1 heat setting and can be wired to lower kW output. Its built-in features includes 120 V control transformer, over temperature protection, wire box to allow for derating kW output. This temperature heater is available in Red powder coated finish and made with UL listed components.
| Electric Convection High Temperature Blower Heater - Qmark SDH6093 - Specifications |
|---|
| Item | Electric Convection Heater |
|---|
| Type | High Temperature Blower |
|---|
| BtuH | 204600 |
|---|
| kW | 60 |
|---|
| Voltage | 600 V |
|---|
| Hz | 60 |
|---|
| Phase | 3 |
|---|
| Amps AC | 58.9 |
|---|
| Number of Heat Settings | 1 Heat Setting, Can Be Wired to Lower kW Output. |
|---|
| Air Temp. Rise (F) | 70 to 173 |
|---|
| Built-In Features | 120V Control Transformer, Over Temperature Protection, Wire Box Allows for Derating kW Output |
|---|
| Includes | Powder Coated Finish, 10" Pneumatic Wheels And Locking Front Caster. |
|---|
| Dimensions | 38-1/2"H X 25-1/2"W X 44"L |
|---|
| Weight | 170 Lbs. |
|---|
| Color | Red |
|---|
| Warranty (Years) | 1 |
|---|
| Agency Compliance | Not Listed, They Are Made With UL Listed Components, But Don't Fall Into a UL Category. |
|---|
Heater-Store or any of it's affiliates are not responsible for damages or injury caused by wrongful installation or application of this product.
38-1/2"H X 25-1/2"W X 44"L