The Register Plus fan forced heater by Cadet is often chosen for its similar appearance to central system register vents. Available in white finish, model RMC202W includes a large squirrel cage blower which quietly provides increased airflow allowing for lower surface and air-at-surface temperatures. Cadet recommends a wall-mounted thermostat for optimum performance, or you may prefer the convenience of an optional field mount thermostat kit.
Fan forced electric air heater shall be UL Listed and dual field rated 208V/240V. A 20 gauge wall mounting can with four knockouts shall be provided with this complete heater. The element and blower shall be of unitized construction and shall attach to wall can with a single screw. Elements shall be steel-finned type, with an oversized 25 amp rating at 240V high temperature manual reset limit switch. A tangential cylindrical blower delivering approximately 60 CFM (RM202), and 50 CFM (RM162 and RM151) shall be driven by an impedance protected motor with permanently lubricated, vibration isolated, dust sealed bearings. Metal grill shall be of one piece construction and finished with a powder coat paint system.
A thermostat is required. For optimum comfort use a Cadet electronic thermostat. Fan heater and thermostat work best when installed on an inside wall. A double pole, built-in thermostat may be installed in the field. UL requires heater to be placed a minimum distance of 6" (15.2 cm) from adjacent surfaces and 4.5" (11.4 cm) from the floor. Manufacturer recommends installation of 12" from all surfaces. A 3� (91.44cm) minimum clearance is recommended for furniture or other objects placed directly in front of heater.
Note: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.
Recommended for elevations under 7500 feet.
Cadet Register Plus Fan Forced Wall Heater RMC202W Features:
- Includes wall can, heater assembly, and grill. Thermostat required (not included).
- Thermal Safeguard:
High temperature manual reset: Turns off heater if normal operating temperatures are exceeded
- Large squirrel cage blower provides increased airflow for lower surface temperatures and quiet performance.
- Commercial grade steel element
- Powder coat paint process eliminates sharp metal edges
- Wall can designed for quick installation with mounting legs that minimize measuring time
- Factory tested
- 5 year warranty
- UL listed
- Optional double pole field mount thermostat kit available
|Cadet Register Plus Fan Forced Wall Heater RMC202W Specifications|
|BTUs||6824 / 5118 BTU|
|Rough In Dimensions||12.75" W x 6" H x 4" D|
|Wall Can Dimensions ||12.625" W x 8.875" H x 4" D|
|Grill Dimensions ||14" W x 7.375" H|
|Carton Dimensions||14.375" W x 9.375" H x 5.75" D|
|Voltage||240 V / 208 V|
|Watts (240V)||2000 W|
|Watts (208V)||1500 W|
|Amps (240V)||8.33 A|
|Amps (208V)||7.21 A|