Electric Forced Air Heaters - TPI 3.3KW 240V Fan Forced Washdown Unit Heater - 11200 BTU - H1H5503T
The TPI 3.3KW 240V Fan Forced Washdown Unit Heater is the perfect choice for safe, convenient heat on the job site. Model H1H5503T having 11200 Btu capacity and one of the most versatile heaters on the market. This unit electric unit heaters constructed for use in areas that require washing or hosing of equipment due to dirty or dusty environments in non-hazardous locations. The totally enclosed water-tight construction made with corrosion-resistant material make the units ideal for industrial heating applications.
| TPI Fan Forced Washdown Unit Heater H1H5503T Specifications |
|---|
| BTU | 11200 |
|---|
| KW | 3.3 |
|---|
| Volts | 240 |
|---|
| Phase | 1 |
|---|
| AMPS | 13.7 |
|---|
| Fuel Type | Electric |
|---|
| Control volts | 24 |
|---|
| Temp. Rise | 26 deg F |
|---|
| Air Throw | 20' |
|---|
| CFM | 400 |
|---|
| Weight | 58 Lbs. |
|---|
| UPC | 686334713061 |
|---|
TPI Fan Forced Washdown Unit Heater H1H5503T Features:
- Heavy-duty 304 16 ga. stainless steel shroud
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available, consult factory.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available, consult factory
- Minimum mounting height is 7' for all units
- ABS Type Approved
- ETL Approved