Forced Air HeatersTPI 5 KW, 240V Fan Forced Washdown Unit Heater - H3H5505T
We present you 5 KW Fan Forced Washdown Unit Heater by TPI. Model H3H5505T is equipped with 17100 BTU, heavy duty 304 16 ga. stainless steel shroud, inlet grill, 24-volt control, 3-position switch, capillary style thermostat, automatic reset thermal cutout and totally enclosed motor. Control panel is constructed on bottom of unit for ease of installation and service. This ABS Type approved is amongst the best unit heaters available in the market.
| Fan Forced Washdown Unit Heater - TPI H3H5505T Specifications |
|---|
| Wattage | 5 KW |
|---|
| BTU | 17100 |
|---|
| Voltage | 240 |
|---|
| Phase | 3 |
|---|
| Ampere | 12.1 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 40 F |
|---|
| Air Throw | 20' |
|---|
| CFM | 400 |
|---|
| Dimensions | 19.75"H x 12"W x 18"H |
|---|
| Weight | 58 Lbs. |
|---|
| UPC | 686334713146 |
|---|
Fan Forced Washdown Unit Heater - TPI H3H5505T Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout. Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available, consult factory.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available, consult factory
- Minimum mounting height is 7' for all units
- ABS Type Approved