Forced Air HeatersTPI 7.5 KW, 240V Fan Forced Washdown Unit Heater - H3H5507T
7.5 KW Fan Forced Washdown Unit Heater is made with all in-built controls and safety temperature controls wired in a non-metallic Nema 4x control panel with single-point power connections. Alongwith 25600 BTU, TPI H3H5507T consists of disconnect switch with enclosure door interlock, front grill rotates to direct airflow, 3 position switch (off-heat-fan) and heavy duty 304 16 ga. stainless steel shroud and inlet grill.
| Fan Forced Washdown Unit Heater - TPI H3H5507T Specifications |
|---|
| Wattage | 7.5 KW |
|---|
| BTU | 25600 |
|---|
| Voltage | 240 |
|---|
| Phase | 3 |
|---|
| Ampere | 13.1 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 60 F |
|---|
| Air Throw | 20' |
|---|
| CFM | 400 |
|---|
| Dimensions | 19.75"H x 12"W x 18"H |
|---|
| Weight | 58 Lbs. |
|---|
| UPC | 686334713214 |
|---|
Fan Forced Washdown Unit Heater - TPI H3H5507T Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout. Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available, consult factory.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available, consult factory
- Minimum mounting height is 7' for all units
- ABS Type Approved