We present you 5 KW Fan Forced Washdown Unit Heater by TPI. Model P3P5505T is equipped with 17100 BTU, heavy duty 304 16 ga. stainless steel shroud, inlet grill, 24-volt control, 3-position switch, capillary style thermostat, automatic reset thermal cutout and totally enclosed motor. Control panel is constructed on bottom of unit for ease of installation and service. This ABS Type approved is amongst the best unit heaters available in the market.
| TPI Fan Forced Washdown Unit Heater - P3P5505T Specifications |
|---|
| Wattage | 5 KW |
|---|
| BTU's | 17100 BTU |
|---|
| VOLTS | 480V |
|---|
| Phase | 3 Ph |
|---|
| AMPS | 6.1 |
|---|
| Control Voltage | 24 |
|---|
| Temp Rise deg F | 40 F |
|---|
| Air Throw | 20' |
|---|
| CFM | 400 |
|---|
| Dimension | 12"W x 18"D x 19.75 H |
|---|
| Weight | 58 lbs. |
|---|
| UPC | 686334713160 |
|---|
| Listed | ETL Listed |
|---|
Fan Forced Washdown Unit Heater - P3P5505T Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available,
- Minimum mounting height is 7' for all units
- ABS Type Approved