We present you 5 KW Fan Forced Washdown Unit Heater by TPI. Model U3U5505T is equipped with 17100 BTU, heavy duty 304 16 ga. stainless steel shroud, inlet grill, 24-volt control, 3-position switch, capillary style thermostat, automatic reset thermal cutout and totally enclosed motor. Control panel is constructed on bottom of unit for ease of installation and service. This ABS Type approved is amongst the best unit heaters available in the market.
| 5 KW, 17100 BTU Fan Forced Washdown Unit Heater TPI U3U5505T Specifications |
|---|
| Power | 5 KW |
|---|
| BTU'S | 17100 |
|---|
| Voltage | 600 |
|---|
| Phase | 3 |
|---|
| Amperage | 5 |
|---|
| Control Voltage | 24 |
|---|
| Temperature Rise | 40 F |
|---|
| Air Throw | 20' |
|---|
| CFM | 400 |
|---|
| Weight | 58 Lbs. |
|---|
5 KW, 17100 BTU Fan Forced Washdown Unit Heater TPI U3U5505T Features:
- Heavy-duty 304 16 Gauge stainless steel shroud.
- Nema 4x non-metallic control panel.
- 24-Volt transformer and control panel.
- 3-position switch (off-heat-fan).
- Capillary thermostat with stainless steel sensor.
- Automatic reset thermal cutout.
- Totally enclosed U.L. listed motor.
- Pilot light (power on indicator).
- Stainless Steel finned tubular element.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow.
- Single-point power connection.
- Fan Blade Epoxy coated Aluminum.
- Meets all U.L., NEC, and OSHA requirements (when installed as directed).
- Corrosion-resistant in high humidity and water-saturated areas (for areas where corrosion resistance is needed in non-hazardous areas, contact factory for heater applications and optional materials).
- ABS (American Bureau of Shipping) type approved