15 KW Fan Forced Washdown Unit Heater, TPI P3P5515T, with 51200 BTU is an electric unit heater constructed for use in areas that require washing or hosing of equipment due to dirty or dusty environments in non-hazardous locations. This user friendly unit is ABS Type approved with Nema 4x non-metallic control panel. Control panel is placed on bottom of unit for ease of installation and service. A must have for all unit heater enthusiasts.
| TPI Fan Forced Washdown Unit Heater - P3P5515T Specifications |
|---|
| Wattage | 15 KW |
|---|
| BTU's | 51200 BTU |
|---|
| VOLTS | 480V |
|---|
| Phase | 3 Ph |
|---|
| AMPS | 18.1 |
|---|
| Control Voltage | 24 |
|---|
| Temp Rise deg F | 68 F |
|---|
| Air Throw | 28' |
|---|
| CFM | 700 |
|---|
| Dimension | 14"W x 19"D x 21.75 H |
|---|
| Weight | 64 lbs. |
|---|
| UPC | 686334713443 |
|---|
| Listed | ETL Listed |
|---|
Fan Forced Washdown Unit Heater - P3P5515T Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available,
- Minimum mounting height is 7' for all units
- ABS Type Approved