Presenting 20 KW Fan Forced Washdown Unit Heater with 68260 BTU manufactured by TPI. Model P3P5520T is one of the most sought-after heaters by TPI. This user-friendly and safe features automatic reset thermal cutout, single point power connection, 24 volt control, pilot light and disconnect switch with enclosure door interlock. The totally enclosed water-tight construction made with corrosion-resistant material makes this unit ideal for industrial heating applications.
| TPI Fan Forced Washdown Unit Heater - P3P5520T Specifications |
|---|
| Wattage | 20 KW |
|---|
| BTU's | 68260 BTU |
|---|
| VOLTS | 480V |
|---|
| Phase | 3 Ph |
|---|
| AMPS | 24.1 |
|---|
| Control Voltage | 24 |
|---|
| Temp Rise deg F | 45 F |
|---|
| Air Throw | 35' |
|---|
| CFM | 1400 |
|---|
| Dimension | 16"W x 27"D x 28.75 H |
|---|
| Weight | 92 lbs. |
|---|
| UPC | 686334713481 |
|---|
| Listed | ETL Listed |
|---|
Fan Forced Washdown Unit Heater - P3P5520T Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available,
- Minimum mounting height is 7' for all units
- ABS Type Approved