48 KW Fan Forced Washdown Unit Heater by TPI lets you to have the desired temperature. Model P3P5548T has multiple features that includes 24-volt control, Nema 4x non-metallic control panel, totally enclosed motor etc. for maximum satisfaction. This cost effective ETL listed unit provides an astonishing output of 163824 BTU.
| TPI Fan Forced Washdown Unit Heater - P3P5548T Specifications |
|---|
| Wattage | 48 KW |
|---|
| BTU's | 163824 BTU |
|---|
| VOLTS | 480V |
|---|
| Phase | 3 Ph |
|---|
| AMPS | 57.8 |
|---|
| Control Voltage | 24 |
|---|
| Temp Rise deg F | 84 F |
|---|
| Air Throw | 42' |
|---|
| CFM | 1800 |
|---|
| Dimension | 18"W x 31"D x 30.75 H |
|---|
| Weight | 126 lbs. |
|---|
| UPC | 686334713641 |
|---|
| Listed | ETL Listed |
|---|
Fan Forced Washdown Unit Heater - P3P5548T Features:
- Heavy-duty 304 16 ga. stainless steel shroud and inlet grill
- Nema 4x non-metallic control panel.
- 24-volt control.
- 3-position switch (off-heat-fan)
- Capillary style thermostat.
- Automatic reset thermal cutout.
- Totally enclosed motor.
- Pilot light (power on indicator)
- Stainless Steel finned tubular element; Monel elements available.
- Control panel on bottom of unit for ease of installation and service.
- Disconnect switch with enclosure door interlock.
- Front grill rotates to direct airflow
- Single-point power connection
- Powder coated epoxy painted stainless steel model available.
- Minimum mounting height is 7' for all units
- ABS Type Approved